Xinjie Intelligent Control (Hangzhou)XINJIE INTELLIGENT CONTROL · HANGZHOU

HomeProject CasesCustom Industrial Embedded Control Board

Custom Industrial Embedded Control Board

Embedded Control · Board CustomizationDelivered

Custom Industrial Embedded Control Board

A 24V direct-supply field control node: 8 digital IOs, 4 sensor interfaces and dual RS-485 + CAN buses, all fitted into a wall-mountable industrial enclosure — with reverse polarity, surge and ground-loop protection designed in.

01 / PROJECT OVERVIEW

Project Overview

01

24V Direct Supply

02

8 Digital IOs

03

4 Sensor Interfaces

04

RS-485 + CAN

05

Three-Stage Input Protection

06

Boxed Unit Delivery

The client's equipment ships to different production lines, and every line demands different interfaces. The old answer was one control cabinet per order: a PLC plus rows of interposing relays and terminals, with dense internal wiring. Bigger cabinets mean more failure points, and changing a single wire on site often meant re-checking the whole cabinet.

03 / OUR ENGINEERING

Our Engineering

The 24V input follows "survive first, then convert": a SMD fuse sits first so it opens on downstream shorts; input-side TVS clamps surge spikes below component ratings; reverse protection uses a series MOSFET instead of a diode — at several amps on a 24V bus a diode's forward drop is a continuous heat source, while a MOSFET's milliohm Rds(on) keeps both drop and temperature rise low.

05 / DELIVERY

Delivery Results

Delivery Status

Delivered

Delivered · board + enclosure + silkscreen package with schematic / PCB source / BOM / test records

Conclusion

Delivered to industrial standards: the board mounts into a wall-mountable enclosure with interfaces brought out from the top and side faces — wiring on site without opening the case. Schematic, PCB source files, BOM and per-channel test records handed over, so the client can revise or move production to another factory.

Engineering first, quote later

Need a similar project?

Describe the scenario and delivery requirements — an engineer will assess feasibility and timeline directly.

ContactPhone