HomeProject Cases
PROJECT CASES
140 project cases covering
20 application areas
From prototype to mass production — every project has a delivery record. Open one to see real photos, the boards used and how far it went.
10 items
DeliveredPCB + Enclosure
Wearable BLE Pendant Electronics and Metal Enclosure
Circular Bluetooth LE board with motion sensing, haptics and LiPo charging, plus a sealed metal pendant enclosure concept.
Details →
DeliveredPCB Design
Round nRF52 Motion Sensing Board
Tiny round board with a Nordic nRF52 MCU, BMI270 IMU, SPI flash, USB-C and a chip antenna.
Details →
DeliveredPCB Design
Round ESP32 Motion Sensor Board
Small round ESP32 board with a USB-C port, 3.3V regulator, accelerometer and slide power switch.
Details →
DeliveredPCB Design
Round BLDC Motor Driver with ESP32-S3
Compact round board combining a three-phase BLDC driver, ESP32-S3, IMU, Hall sensor and Li-ion charging.
Details →
DeliveredPCB Design
nRF52840 Board with USB-C and LiPo Charging
Compact nRF52840 board with USB-C, battery charging and an on-board antenna, refined over four revisions.
Details →
DeliveredPCB Design
nRF52840 Bluetooth Motion Sensor Board
Compact Bluetooth LE board with an IMU, USB-C and a single-cell Li-ion charger, laid out on a very small PCB.
Details →
DeliveredPCB Design
nRF52811 Wireless Remote and Receiver Boards
A battery-powered nRF52811 handheld transmitter with potentiometers and buttons, plus a tiny motor-driver receiver.
Details →
DeliveredPCB + Firmware
ESP32-C3 Battery-Powered Round Board with Firmware
Tiny round ESP32-C3 board with Li-ion charging, boost-buck regulation, button and LED, with firmware.
Details →
DeliveredPCB Design
Compact nRF52840 Bluetooth Board with Li-ion Charging
Tiny nRF52840 BLE board with chip antenna, USB, Li-ion charger and 0201 passives.
Details →
DeliveredPCB Design
Compact nRF52840 BLE Module with LiPo Charging
Tiny Bluetooth LE board with an nRF52840, chip antenna and a LiPo charger, in two versions.
Details →