HomeProject Cases
PROJECT CASES
140 project cases covering
20 application areas
From prototype to mass production — every project has a delivery record. Open one to see real photos, the boards used and how far it went.
26 items
Prototype VerifiedAI Voice Terminal
Blind-Student AI Intercom Terminal
A handheld AI voice terminal designed for special-education and blind schools. Six physical buttons with voice feedback cover every operation — no screen needed: hold the side key to talk with the AI, English read-along scored instantly.
Details →
DeliveredPCB Design
Wearable Health and NFC Sensor Board
Compact four-layer board with an ESP32-C6, heart-rate sensor, IMU and NFC with a PCB coil antenna.
Details →
DeliveredPCB + Enclosure
Smart Speaker Device: PCB and 3D-Printable Case
ESP32-S3 audio device with I2S microphone, amplifier and battery charging, plus a pebble-shaped printable enclosure.
Details →
DeliveredPCB Design
Round ESP32 Motion Sensor Board
Small round ESP32 board with a USB-C port, 3.3V regulator, accelerometer and slide power switch.
Details →
DeliveredPCB Design
Round BLDC Motor Driver with ESP32-S3
Compact round board combining a three-phase BLDC driver, ESP32-S3, IMU, Hall sensor and Li-ion charging.
Details →
DeliveredPCB Design
Ethernet and PoE ESP32 Controller Boards
Family of ESP32 controller boards: PoE and non-PoE Ethernet versions plus a battery-powered variant.
Details →
DeliveredPCB Design
ESP32 Wireless Biopotential Acquisition Board
ESP32 board with a 4-channel ADS1299 biopotential front end, IMU and Li-ion charging.
Details →
DeliveredPCB Design
ESP32-S3 Stepper and Lidar Controller Board
ESP32-S3 carrier board with stepper driver, lidar and sensor connectors, UPS power module and status LEDs.
Details →
DeliveredPCB Design
ESP32-S3 Smart Lock Controller with NFC and Battery Boards
A three-board access-control set: an ESP32-S3 main controller, an NFC reader board and a battery charging board.
Details →
DeliveredPCB Design
ESP32-S3 RS485 Relay Controller
Wi-Fi enabled relay controller board with isolated RS485, real-time clock, flash memory and a protected power input.
Details →
DeliveredPCB Layout & Routing
ESP32-S3 RGBW Lighting Controller
Compact ESP32-S3 controller board that drives an addressable RGBW LED strip from a 5 V supply with level shifting.
Details →
DeliveredPCB Design
ESP32-S3 Portable Audio Device with Battery Management
A battery-powered ESP32-S3 audio board with I2S amplifier, charger, fuel gauge and a separate microphone/button board.
Details →
DeliveredPCB Design
ESP32-S3 LoRa Audio Controller Board
ESP32-S3 board with a LoRa radio module, stereo audio stage, microSD and an onboard 12V-to-5V buck converter.
Details →
DeliveredPCB Design
ESP32-S3 Cellular IoT Board
ESP32-S3 board with SIM card, cellular modem section, USB-C and status LEDs.
Details →
DeliveredPCB Design
ESP32-S3 Cellular IoT Board with LTE-M Modem
A cellular IoT development board combining an ESP32-S3 module, a SIM7080G LTE-M/NB-IoT modem and a USB-C power and programming port.
Details →
DeliveredPCB Design
ESP32-S3 Cellular IoT Board with Battery Input
ESP32-S3 board with SIM card, cellular modem section, battery connector and USB-C.
Details →
DeliveredPCB Design
ESP32-S3 Cellular GPS Tracker Board
ESP32-S3 board with 4G modem, GNSS, CAN interface, IMU, fuel gauge and USB-C.
Details →
DeliveredPCB Design
ESP32-P4 Six-Layer Edge Computing Board
45 x 45 mm six-layer ESP32-P4 board with Ethernet, USB, CAN, eMMC and motion sensors.
Details →
DeliveredPCB Design
ESP32-P4 Controller Board with RS-485 and SD
ESP32-P4 development-style board with Wi-Fi module, USB-C, SD card, RS-485 and a 24 V-capable power stage.
Details →
DeliveredPCB Design
ESP32 Digital HVAC Controller Retrofit Board
ESP32 board with motor drivers and analog outputs for a retrofit digital climate controller in a classic sports car.
Details →
DeliveredPCB Design
ESP32-C3 LED Matrix Display Board
A 2-layer ESP32-C3 board driving a large array of LEDs, with USB-C power and programming.
Details →
DeliveredPCB + Firmware
ESP32-C3 Battery-Powered Round Board with Firmware
Tiny round ESP32-C3 board with Li-ion charging, boost-buck regulation, button and LED, with firmware.
Details →
DeliveredPCB Design
ESP32-C3 Addressable RGBW LED Matrix Board
Large two-layer board with 69 addressable RGBW LEDs driven by an ESP32-C3.
Details →
DeliveredPCB Design
Appliance Controller with Valve, Pump and Mains Outputs
ESP32-S3 controller board driving solenoid valves, pumps and mains loads, with LCD, humidity and flow sensing.
Details →
DeliveredESP32-S3
CD Lossless Playback & Ripping System
A CD lossless playback and ripping unit on an ESP32-S3 controller: via USB Host the CD drive presents as mass storage and WAV tracks are read directly; Bluetooth and optical/coaxial S/PDIF outputs from the same I2S source, with whole-disc ripping to archive.
Details →
DeliveredESP32-S3
AI Desktop Companion Robot
A desktop AI companion robot on a custom ESP32-S3 board with a microphone array and speaker, connected to LLM APIs for real-time conversation; supports custom knowledge bases and private training.
Details →