芯界智控(杭州)Xinjie Intelligent Control (Hangzhou)

首页技术文章PCB Design Review Checklist: 12 Things to Check Before Fabrication

行业观察

PCB Design Review Checklist: 12 Things to Check Before Fabrication

PCB Design Review Checklist: 12 Things to Check Before Fabrication | MNM Tech LLC Skip to content MN

PCB Design Review Checklist: 12 Things to Check Before Fabrication | MNM Tech LLC Skip to content MNM Tech LLC Services Portfolio About Process Payments Blog Client login Get a quote Home

Blog

PCB Design Review Checklist: 12 Things to Check Before Fabrication

Blog

A practical pre-fabrication checklist covering power, grounding, decoupling, RF, thermal and manufacturability: the issues that most often cost a board revision.

October 29, 2026 · By Maaz Amir

A board revision costs weeks and money. Most respins are caused by a short list of avoidable problems. This is the checklist we use when reviewing designs before fabrication.

Power

Power tree: every rail has a source, a current budget and margin for worst-case load.

Protection: reverse polarity, over-voltage and ESD protection on every external connector.

Regulator layout: input and output capacitors close to the regulator, short high-current loops.

Grounding and decoupling

Return paths: high-speed signals run over an unbroken ground plane; no splits under them.

Decoupling: one capacitor per power pin, placed as close to the pin as possible, with a short via to ground.

Signals and RF

Differential pairs: USB, Ethernet and similar pairs are length-matched and routed together.

Antennas: module antennas sit at the board edge with copper and components kept out of the keep-out zone.

Thermal and current

Copper for current: trace widths and copper pours sized for the real current, with thermal vias under hot parts.

Manufacturability

Footprints: verified against the datasheet for every new part.

Clearances: match your fab house's capabilities, not just the tool's defaults.

Assembly: polarity marks, fiducials and enough space for rework.

Availability: every part is in stock, with an alternate for anything single-sourced.

Want an independent review of your board? Our design review service gives you a prioritised list of fixes before you order.

More articles

PCB Manufacturing Files Explained: Gerber, Drill, BOM and CPL

Have a board or product to build?

Share your requirements, sketches or existing files. We'll reply with a clear scope, timeline and quote.

See our work We usually reply within 24 hours.

MNM Tech LLC is a US-registered hardware engineering company delivering PCB design, embedded firmware and IoT product development for clients worldwide.

Services

PCB Design & Layout

Schematic & Circuit Design

Embedded Firmware

IoT & Wireless Connectivity

Product Development & Enclosures

Power & Battery Systems

Company

About us

Portfolio

Our process

Team

Payment methods

Blog

Contact

hello@mnmtechs.com

+92 312 4392257

WhatsApp

7901 4th St N, STE 300, St. Petersburg, FL, USA

© 2026 MNM Tech LLC . All rights reserved. Registered in Florida, USA.

工程先看,再谈报价

你的项目里
也遇到类似问题?

把你的场景发过来,这些问题我们在真实项目里解决过。

联系电话