HomeProject Cases
PROJECT CASES
138 project cases covering
20 application areas
From prototype to mass production — every project has a delivery record. Open one to see real photos, the boards used and how far it went.
16 items
DeliveredPCB Design
Solar Meshtastic Sensor Baseboard
Small 2-layer carrier board that replaces a breadboard prototype for a solar and battery powered sensor node.
Details →
DeliveredPCB Design
Round ESP32 Motion Sensor Board
Small round ESP32 board with a USB-C port, 3.3V regulator, accelerometer and slide power switch.
Details →
DeliveredPCB Design
ESP32-S3 RS485 Relay Controller
Wi-Fi enabled relay controller board with isolated RS485, real-time clock, flash memory and a protected power input.
Details →
DeliveredPCB Layout & Routing
ESP32-S3 RGBW Lighting Controller
Compact ESP32-S3 controller board that drives an addressable RGBW LED strip from a 5 V supply with level shifting.
Details →
DeliveredPCB Design
ESP32-S3 Presence and Environment Sensor Hub (Two-Board Set)
A two-board ESP32-S3 smart sensing unit with mmWave radar, air-quality sensing, microphone, audio amplifier and a touch/LED front panel.
Details →
DeliveredPCB Design
ESP32-S3 E-Paper Display Board with Fuel Gauge
A small 2-layer board that drives a 3.7-inch e-paper panel from an ESP32-S3 module, with a battery fuel gauge and onboard boost supply.
Details →
DeliveredPCB Design
ESP32-S3 Cellular IoT Board
ESP32-S3 board with SIM card, cellular modem section, USB-C and status LEDs.
Details →
DeliveredPCB Design
ESP32-S3 Cellular IoT Board with LTE-M Modem
A cellular IoT development board combining an ESP32-S3 module, a SIM7080G LTE-M/NB-IoT modem and a USB-C power and programming port.
Details →
DeliveredPCB Design
ESP32-S3 Cellular IoT Board with Battery Input
ESP32-S3 board with SIM card, cellular modem section, battery connector and USB-C.
Details →
DeliveredPCB Design
ESP32-S3 Cellular GPS Tracker Board
ESP32-S3 board with 4G modem, GNSS, CAN interface, IMU, fuel gauge and USB-C.
Details →
DeliveredPCB Design
ESP32-P4 LTE, GPS and CAN Connected Controller
A multi-function controller combining an ESP32-P4, an ESP32-C6 radio, LTE modem, GPS/IMU, CAN bus, microSD and display interface.
Details →
DeliveredPCB Design
ESP32-C6 Wi-Fi and Ethernet Data Logger
A 4-layer data logger board with an ESP32-C6 module, RS485 Modbus, microSD storage and optional wired Ethernet.
Details →
DeliveredPCB + Firmware
ESP32-C6 RS485 Ultrasonic Weather Station Interface
Custom ESP32-C6 board with an RS485 interface that reads an ultrasonic weather station over Modbus RTU.
Details →
DeliveredPCB + Enclosure
ESP32-C6 Environmental Sensor Board with Enclosure
Small ESP32-C6 temperature, humidity and motion sensing board with a matching 3D enclosure.
Details →
DeliveredPCB + Firmware
ESP32-C3 Battery-Powered Round Board with Firmware
Tiny round ESP32-C3 board with Li-ion charging, boost-buck regulation, button and LED, with firmware.
Details →
DeliveredPCB Design
Cellular ESP32-S3 Pulse-Oximeter Sensor Board
A battery-powered ESP32-S3 board with an LTE-M/NB-IoT modem, pulse oximetry sensor and Li-ion charging.
Details →