HomeProject Cases
PROJECT CASES
140 project cases covering
20 application areas
From prototype to mass production — every project has a delivery record. Open one to see real photos, the boards used and how far it went.
89 items
DeliveredSmart Hardware
Aerospace Electronics Customization: FPGA Lightweight High-Reliability Mission Platform
A custom FPGA-based lightweight, high-reliability platform for space-mission electronics — redundancy, verification and qualification-oriented design practice.
Details →
DeliveredSmart Hardware
Extending Legacy Subsea Oil & Gas Systems: undocumented-chip Reverse Work + FPGA Replication
When an undocumented obsolete chip blocks a subsea oil-and-gas system's life extension: reverse analysis of the device behavior and FPGA-based replication — without rebuilding the entire system.
Details →
DeliveredPCB Design
Wearable Motion and Health Sensor Boards
Two compact nRF52840 sensor boards with battery charging, motion sensing, heart-rate sensing and NFC.
Details →
DeliveredPCB Design
Wearable Health and NFC Sensor Board
Compact four-layer board with an ESP32-C6, heart-rate sensor, IMU and NFC with a PCB coil antenna.
Details →
DeliveredPCB Design
Wearable ECG and NFC Sensor Board
Small battery-powered ECG biosignal board based on the MAX30001 analog front end with NFC and Bluetooth LE.
Details →
DeliveredPCB + Enclosure
Wearable BLE Pendant Electronics and Metal Enclosure
Circular Bluetooth LE board with motion sensing, haptics and LiPo charging, plus a sealed metal pendant enclosure concept.
Details →
DeliveredPCB Design
USB Controller and Strain Gauge Sensor Boards
Two small boards: a USB-C SAMD21 controller and a multi-channel sensor/driver board, with a battery-powered strain-gauge variant.
Details →
DeliveredPCB Design
USB-C Wireless Serial Module Carrier Board
A compact carrier board giving a UART wireless module USB-C power and data, status LEDs and ESD protection.
Details →
DeliveredPCB Design
USB-C Audio Playback Module with Touch Control
Battery-powered audio playback board with USB-C charging, flash storage, touch control and speaker output.
Details →
DeliveredPCB Design
Touch E-Paper Reader Board with Frontlight and microSD
An ESP32-S3 board for a 4.26-inch touch e-paper panel with frontlight boost, fuel gauge and microSD storage.
Details →
DeliveredPCB Design
STM32H5 Secure Handheld Device Board
Four-layer STM32H5 board with multi-rail power, display connector and a button keypad for a secure handheld device.
Details →
DeliveredPCB Design
STM32 CAN-Bus Vehicle Controller Board
Multi-channel CAN, LIN and serial vehicle controller board based on an STM32F107 with Wi-Fi.
Details →
DeliveredPCB Design
Stepper Motor Controller Interface Board
A compact 2-layer board with a buck regulator and connectors for driving a stepper motor.
Details →
DeliveredPCB Design
Solar Meshtastic Sensor Baseboard
Small 2-layer carrier board that replaces a breadboard prototype for a solar and battery powered sensor node.
Details →
DeliveredPCB + Enclosure
Smart Speaker Device: PCB and 3D-Printable Case
ESP32-S3 audio device with I2S microphone, amplifier and battery charging, plus a pebble-shaped printable enclosure.
Details →
DeliveredPCB Design
RP2040 USB Board with UART Bridge and Display
RP2040 board with two USB-C ports, an FT232 serial bridge, SPI flash and a 1.77-inch TFT display.
Details →
DeliveredPCB Design
Router Expansion Board with CAN, IMU, LTE-M and Relay
Expansion board adding dual CAN, a 9-axis IMU, audio/PTT, relay switching and an LTE-M listener to a router.
Details →
DeliveredPCB Design
Round nRF52 Motion Sensing Board
Tiny round board with a Nordic nRF52 MCU, BMI270 IMU, SPI flash, USB-C and a chip antenna.
Details →
DeliveredPCB Design
Round ESP32 Motion Sensor Board
Small round ESP32 board with a USB-C port, 3.3V regulator, accelerometer and slide power switch.
Details →
DeliveredPCB Design
Round BLDC Motor Driver with ESP32-S3
Compact round board combining a three-phase BLDC driver, ESP32-S3, IMU, Hall sensor and Li-ion charging.
Details →
DeliveredPCB Design
nRF52840 Board with USB-C and LiPo Charging
Compact nRF52840 board with USB-C, battery charging and an on-board antenna, refined over four revisions.
Details →
DeliveredPCB Design
nRF52840 Bluetooth Motion Sensor Board
Compact Bluetooth LE board with an IMU, USB-C and a single-cell Li-ion charger, laid out on a very small PCB.
Details →
DeliveredPCB Design
nRF52811 Wireless Remote and Receiver Boards
A battery-powered nRF52811 handheld transmitter with potentiometers and buttons, plus a tiny motor-driver receiver.
Details →
DeliveredPCB Design
nRF52 Wireless Audio Board with LiPo Charging
A small nRF52-based board with a MEMS microphone, I2S amplifier, addressable LED and USB-C LiPo charging.
Details →
DeliveredPCB Design
NFC Access Controller with E-Paper Display
ESP32-S3 access controller with NFC reader, relay lock output, e-paper display and USB-PD battery board.
Details →
DeliveredPCB Design
Multi-Radio nRF52840 and ESP32 Wireless Board
Compact multi-radio wireless board combining several nRF52840 nodes and an ESP32 module with RF connectors and USB-C.
Details →
DeliveredPCB Design
Multi-Output Clock Generator and Fan-Out Board
A low-jitter clock generator board with a network synchronizer IC, precision oscillators, MMCX outputs and a fiber-optic link.
Details →
DeliveredPCB Design
Multi-Motor Driver Carrier Board for Arduino
A carrier board that connects an Arduino-style controller to nine motor driver modules, three servos and a high-current battery input.
Details →
DeliveredPCB Design
Multi-MCU High-Pin-Count Processor Carrier Board
Square carrier board with a central thermal pad, four edge MCUs, dense connector arrays and local power regulation.
Details →
DeliveredPCB Layout & Routing
MSP430 Microcontroller Board Layout and Routing
Placement and routing of an MSP430-based board with I2C expanders, multiplexers and a high-density board-to-board connector.
Details →
DeliveredPCB Design
Mains-Powered LED Driver (Flyback)
A two-board offline LED driver: an AC mains input and rectifier board and an isolated flyback converter board.
Details →
DeliveredPCB Design
LM386 Guitar Amplifier PCB
Simple through-hole LM386 audio amplifier board with volume, tone and gain controls.
Details →
DeliveredPCB Design
Industrial I/O Motherboard with Daughter and Sensor Boards
A three-board system: an I/O motherboard with ADCs, DACs and Ethernet, a relay daughter board and an ESP32 inductive-sensing board.
Details →
DeliveredPCB Design
High-Speed DAC Analog Output Board
A two-channel analog output board with a high-speed DAC, op-amp driver stages, SMA outputs and relay switching.
Details →
DeliveredPCB Design
High-Power White LED Strip PCB
Long narrow PCB carrying twelve high-power white LEDs on a two-wire supply.
Details →
DeliveredPCB Design
High-Channel-Count Analog Multiplexing Interface Board
An 8-layer interface board with hundreds of components, analog multiplexers and shift registers behind four dense connector arrays.
Details →
DeliveredPCB Design
Guitar Effects Pedal Board with Daisy Seed
Analogue input/output stage and control board for a digital guitar effects pedal.
Details →
DeliveredPCB Design
GPS Tracker Device
Versatile GPS tracker that monitors location, detects motion and raises emergency alerts.
Details →
DeliveredPCB Layout & Routing
Gold Contact-Ring Slip-Ring PCB
Round three-lug PCB with two concentric exposed contact rings for 12 V power transfer.
Details →
DeliveredPCB Design
GNSS Controller and LoRa/BLE Module Boards
STM32 GNSS board with CAN and USB, plus a LoRa and Bluetooth LE communication board.
Details →
DeliveredPCB Design
Fuel Injector Flow-Bench Controller
STM32-based controller board with injector driver, USB and protected 12 V input.
Details →
DeliveredPCB Design
Fuel Injection Test Bench Interface Board
Arduino Nano interface board with opto-isolated inputs and a MOSFET pump driver for an engine test bench.
Details →
DeliveredPCB Design
Four-Channel Relay Controller with GPS
12 V board with four fused relay outputs, a GPS module and a microcontroller socket.
Details →
DeliveredPCB Design
Four-Channel Relay Controller Board
12 V relay controller with four fused relay outputs, an on-board buck supply, pump-signal sensing and a GPS header.
Details →
DeliveredPCB Design
Ethernet and PoE ESP32 Controller Boards
Family of ESP32 controller boards: PoE and non-PoE Ethernet versions plus a battery-powered variant.
Details →
DeliveredPCB Design
ESP32 Wireless Biopotential Acquisition Board
ESP32 board with a 4-channel ADS1299 biopotential front end, IMU and Li-ion charging.
Details →
DeliveredPCB Design
ESP32-S3 Stepper and Lidar Controller Board
ESP32-S3 carrier board with stepper driver, lidar and sensor connectors, UPS power module and status LEDs.
Details →
DeliveredPCB Design
ESP32-S3 Smart Lock Controller with NFC and Battery Boards
A three-board access-control set: an ESP32-S3 main controller, an NFC reader board and a battery charging board.
Details →
DeliveredPCB Design
ESP32-S3 RS485 Relay Controller
Wi-Fi enabled relay controller board with isolated RS485, real-time clock, flash memory and a protected power input.
Details →
DeliveredPCB Layout & Routing
ESP32-S3 RGBW Lighting Controller
Compact ESP32-S3 controller board that drives an addressable RGBW LED strip from a 5 V supply with level shifting.
Details →
DeliveredPCB Design
ESP32-S3 Presence and Environment Sensor Hub (Two-Board Set)
A two-board ESP32-S3 smart sensing unit with mmWave radar, air-quality sensing, microphone, audio amplifier and a touch/LED front panel.
Details →
DeliveredPCB Design
ESP32-S3 Portable Audio Device with Battery Management
A battery-powered ESP32-S3 audio board with I2S amplifier, charger, fuel gauge and a separate microphone/button board.
Details →
DeliveredPCB Design
ESP32-S3 LoRa Audio Controller Board
ESP32-S3 board with a LoRa radio module, stereo audio stage, microSD and an onboard 12V-to-5V buck converter.
Details →
DeliveredPCB Design
ESP32-S3 E-Paper Display Board with Fuel Gauge
A small 2-layer board that drives a 3.7-inch e-paper panel from an ESP32-S3 module, with a battery fuel gauge and onboard boost supply.
Details →
DeliveredPCB Design
ESP32-S3 Cellular IoT Board
ESP32-S3 board with SIM card, cellular modem section, USB-C and status LEDs.
Details →
DeliveredPCB Design
ESP32-S3 Cellular IoT Board with LTE-M Modem
A cellular IoT development board combining an ESP32-S3 module, a SIM7080G LTE-M/NB-IoT modem and a USB-C power and programming port.
Details →
DeliveredPCB Design
ESP32-S3 Cellular IoT Board with Battery Input
ESP32-S3 board with SIM card, cellular modem section, battery connector and USB-C.
Details →
DeliveredPCB Design
ESP32-S3 Cellular GPS Tracker Board
ESP32-S3 board with 4G modem, GNSS, CAN interface, IMU, fuel gauge and USB-C.
Details →
DeliveredPCB Design
ESP32-P4 Six-Layer Edge Computing Board
45 x 45 mm six-layer ESP32-P4 board with Ethernet, USB, CAN, eMMC and motion sensors.
Details →
DeliveredPCB Design
ESP32-P4 LTE, GPS and CAN Connected Controller
A multi-function controller combining an ESP32-P4, an ESP32-C6 radio, LTE modem, GPS/IMU, CAN bus, microSD and display interface.
Details →
DeliveredPCB Design
ESP32-P4 Controller Board with RS-485 and SD
ESP32-P4 development-style board with Wi-Fi module, USB-C, SD card, RS-485 and a 24 V-capable power stage.
Details →
DeliveredPCB Design
ESP32 Digital HVAC Controller Retrofit Board
ESP32 board with motor drivers and analog outputs for a retrofit digital climate controller in a classic sports car.
Details →
DeliveredPCB Design
ESP32-C6 Wi-Fi and Ethernet Data Logger
A 4-layer data logger board with an ESP32-C6 module, RS485 Modbus, microSD storage and optional wired Ethernet.
Details →
DeliveredPCB + Firmware
ESP32-C6 RS485 Ultrasonic Weather Station Interface
Custom ESP32-C6 board with an RS485 interface that reads an ultrasonic weather station over Modbus RTU.
Details →
DeliveredPCB + Enclosure
ESP32-C6 Environmental Sensor Board with Enclosure
Small ESP32-C6 temperature, humidity and motion sensing board with a matching 3D enclosure.
Details →
DeliveredPCB Design
ESP32-C3 LED Matrix Display Board
A 2-layer ESP32-C3 board driving a large array of LEDs, with USB-C power and programming.
Details →
DeliveredPCB + Firmware
ESP32-C3 Battery-Powered Round Board with Firmware
Tiny round ESP32-C3 board with Li-ion charging, boost-buck regulation, button and LED, with firmware.
Details →
DeliveredPCB Design
ESP32-C3 Addressable RGBW LED Matrix Board
Large two-layer board with 69 addressable RGBW LEDs driven by an ESP32-C3.
Details →
DeliveredPCB Design
Electrolysis Dosing Controller
Controller board for an adjustable-voltage electrolysis dosing system with ESP32-S3, mains input and polarity reversal.
Details →
DeliveredPCB Design
Dual-PCB Smart Wall Panel with Presence Sensing
A two-board wall-mounted smart panel with mmWave radar, microphone, environmental sensors, touch zones and audio output.
Details →
DeliveredPCB Design
DMX512 Expansion for 16-Channel Controller
Revision of a 16-channel controller with DMX512 plug-in boards using isolated RS-485.
Details →
DeliveredEnclosure Design
Cube Enclosure Frame for Five Side-Mounted Circuit Boards
Reinforced 3D-printable cube frame holding five 76 mm boards on its faces with a recessed top cup.
Details →
DeliveredPCB Design
Compact nRF52840 Bluetooth Board with Li-ion Charging
Tiny nRF52840 BLE board with chip antenna, USB, Li-ion charger and 0201 passives.
Details →
DeliveredPCB Design
Compact nRF52840 BLE Module with LiPo Charging
Tiny Bluetooth LE board with an nRF52840, chip antenna and a LiPo charger, in two versions.
Details →
DeliveredPCB + Enclosure
Coin-Cell Powered Wireless Sensor Board with Enclosure
A compact low-power wireless sensor board powered from a coin cell, with a matching 3D-printable enclosure.
Details →
DeliveredPCB Design
CM5 High-Speed Carrier PCB with 4G LTE, NFC, Power and RS232
High-speed CM5 carrier board with SIM7600 LTE, buck-boost battery charging, NFC and RS-232.
Details →
DeliveredPCB Design
Cellular ESP32-S3 Pulse-Oximeter Sensor Board
A battery-powered ESP32-S3 board with an LTE-M/NB-IoT modem, pulse oximetry sensor and Li-ion charging.
Details →
DeliveredPCB Design
Battery Power Controller with Current Sensing
Fused battery load-switch board with low-power buck supply, voltage monitoring and current sensing.
Details →
DeliveredPCB Design
Battery Power Controller with Current Monitoring
A battery-powered controller with USB-C charging, a high-current power path, current monitoring and a CH32V003 microcontroller.
Details →
DeliveredPCB Design
Battery Charging and Power Switch Board
Simple power board combining a DC-DC converter module, a charging module and a battery with switch connections.
Details →
DeliveredPCB Design
Audio Codec and USB-Serial Board with Multi-Rail Power
A board combining a multi-channel audio codec, USB-to-serial bridge and several regulated supply rails.
Details →
DeliveredPCB Design
ATtiny85 Servo and Solenoid Controller
Battery-powered ATtiny85 board driving a servo and a solenoid from boosted and bucked rails.
Details →
DeliveredPCB Design
Appliance Controller with Valve, Pump and Mains Outputs
ESP32-S3 controller board driving solenoid valves, pumps and mains loads, with LCD, humidity and flow sensing.
Details →
DeliveredPCB Design
Analog Distortion Guitar Pedal PCB
Through-hole PCB for a high-gain analog guitar distortion pedal, redrawn and laid out for fabrication.
Details →
DeliveredPCB Design
AI Desktop Robot Head and Body Controller Boards
Two-board electronics for a desktop AI robot: an i.MX 93 head board and an RP2354A body board with motor drivers.
Details →
DeliveredPCB Design
8-Channel Pushbutton and Indicator Interface Board
Long 4-layer interface board with eight illuminated pushbuttons, driver ICs and multiple connectors.
Details →
DeliveredPCB Design
24-Channel Relay and Power Distribution Control Board
Large relay board with 24 transistor-driven relays, I/O expanders, ADCs and heavy-current power studs.
Details →
DeliveredPCB Design
16-Channel Motor Controller with Plug-In Driver Boards
Through-hole 16-channel DC motor controller with replaceable single-channel driver boards.
Details →
DeliveredPCB Design
12-LED Infrared Strip PCB
Long narrow board with twelve 850 nm infrared LEDs on a two-wire supply.
Details →