HomeProject Cases
PROJECT CASES
140 project cases covering
20 application areas
From prototype to mass production — every project has a delivery record. Open one to see real photos, the boards used and how far it went.
26 items
DeliveredPCB Design
Wearable ECG and NFC Sensor Board
Small battery-powered ECG biosignal board based on the MAX30001 analog front end with NFC and Bluetooth LE.
Details →
DeliveredPCB Design
USB-C Audio Playback Module with Touch Control
Battery-powered audio playback board with USB-C charging, flash storage, touch control and speaker output.
Details →
DeliveredPCB Design
Touch E-Paper Reader Board with Frontlight and microSD
An ESP32-S3 board for a 4.26-inch touch e-paper panel with frontlight boost, fuel gauge and microSD storage.
Details →
DeliveredPCB Design
Stepper Motor Controller Interface Board
A compact 2-layer board with a buck regulator and connectors for driving a stepper motor.
Details →
DeliveredPCB + Enclosure
Smart Speaker Device: PCB and 3D-Printable Case
ESP32-S3 audio device with I2S microphone, amplifier and battery charging, plus a pebble-shaped printable enclosure.
Details →
DeliveredPCB Design
nRF52840 Board with USB-C and LiPo Charging
Compact nRF52840 board with USB-C, battery charging and an on-board antenna, refined over four revisions.
Details →
DeliveredPCB Design
nRF52840 Bluetooth Motion Sensor Board
Compact Bluetooth LE board with an IMU, USB-C and a single-cell Li-ion charger, laid out on a very small PCB.
Details →
DeliveredPCB Design
NFC Access Controller with E-Paper Display
ESP32-S3 access controller with NFC reader, relay lock output, e-paper display and USB-PD battery board.
Details →
DeliveredPCB Design
Multi-MCU High-Pin-Count Processor Carrier Board
Square carrier board with a central thermal pad, four edge MCUs, dense connector arrays and local power regulation.
Details →
DeliveredPCB Design
Mains-Powered LED Driver (Flyback)
A two-board offline LED driver: an AC mains input and rectifier board and an isolated flyback converter board.
Details →
DeliveredPCB Design
Ethernet and PoE ESP32 Controller Boards
Family of ESP32 controller boards: PoE and non-PoE Ethernet versions plus a battery-powered variant.
Details →
DeliveredPCB Design
ESP32 Wireless Biopotential Acquisition Board
ESP32 board with a 4-channel ADS1299 biopotential front end, IMU and Li-ion charging.
Details →
DeliveredPCB Design
ESP32-S3 Portable Audio Device with Battery Management
A battery-powered ESP32-S3 audio board with I2S amplifier, charger, fuel gauge and a separate microphone/button board.
Details →
DeliveredPCB Design
ESP32-S3 LoRa Audio Controller Board
ESP32-S3 board with a LoRa radio module, stereo audio stage, microSD and an onboard 12V-to-5V buck converter.
Details →
DeliveredPCB Design
ESP32-S3 E-Paper Display Board with Fuel Gauge
A small 2-layer board that drives a 3.7-inch e-paper panel from an ESP32-S3 module, with a battery fuel gauge and onboard boost supply.
Details →
DeliveredPCB Design
ESP32-S3 Cellular IoT Board with Battery Input
ESP32-S3 board with SIM card, cellular modem section, battery connector and USB-C.
Details →
DeliveredPCB + Firmware
ESP32-C3 Battery-Powered Round Board with Firmware
Tiny round ESP32-C3 board with Li-ion charging, boost-buck regulation, button and LED, with firmware.
Details →
DeliveredPCB Design
Electrolysis Dosing Controller
Controller board for an adjustable-voltage electrolysis dosing system with ESP32-S3, mains input and polarity reversal.
Details →
DeliveredPCB + Enclosure
Coin-Cell Powered Wireless Sensor Board with Enclosure
A compact low-power wireless sensor board powered from a coin cell, with a matching 3D-printable enclosure.
Details →
DeliveredPCB Design
Cellular ESP32-S3 Pulse-Oximeter Sensor Board
A battery-powered ESP32-S3 board with an LTE-M/NB-IoT modem, pulse oximetry sensor and Li-ion charging.
Details →
DeliveredPCB Design
Battery Power Controller with Current Sensing
Fused battery load-switch board with low-power buck supply, voltage monitoring and current sensing.
Details →
DeliveredPCB Design
Battery Power Controller with Current Monitoring
A battery-powered controller with USB-C charging, a high-current power path, current monitoring and a CH32V003 microcontroller.
Details →
DeliveredPCB Design
Battery Charging and Power Switch Board
Simple power board combining a DC-DC converter module, a charging module and a battery with switch connections.
Details →
DeliveredPCB Design
Audio Codec and USB-Serial Board with Multi-Rail Power
A board combining a multi-channel audio codec, USB-to-serial bridge and several regulated supply rails.
Details →
DeliveredPCB Design
ATtiny85 Servo and Solenoid Controller
Battery-powered ATtiny85 board driving a servo and a solenoid from boosted and bucked rails.
Details →
DeliveredPCB Design
24-Channel Relay and Power Distribution Control Board
Large relay board with 24 transistor-driven relays, I/O expanders, ADCs and heavy-current power studs.
Details →